Peridon Entertainment > News > Home Audio > How to Hide the Cable Box When Mounting TV on Wall
  • Posted by:
  • Category: Home Audio
TV

There are many advantages to mounting TV on wall as opposed to displaying it on a shelf or tabletop. Mounted on the wall, a TV looks wonderful, is easier to see, and takes up less space. Yet, if you don’t have conduits to pass the wires, an electrical outlet, or a cord cover, the low-voltage cables and power cord for your TV can be a safety hazard.

How to Hide the Cable Box When Mounting TV on the Wall

Even though you’ll need to use wire to link your TV to the cable box, you don’t have to let it spoil the aesthetics of your media setup. You can hide the cable box behind the TV, in a cabinet, or even in a different room.

Can you mount a cable box behind a TV?

If you want to put a cable box behind your TV, you’ll need the following two things:

You may access the cable connections for your TV from beneath the screen. In addition to your power cord, you may also discreetly mount a cable wire.

 A power strip that’s hidden beneath the TV. Keep in mind that even if there isn’t an outlet behind your TV, you can still quietly place your electronics behind the screen and hide the remaining ten percent of your wires and boxes.

Note: To plug in the TV, you’ll need to call an electrician to install a new outlet beneath the screen. Cable companies typically offer the service of repositioning cable connections.

Here is how you can hide the cable box when mounting TV on wall.

Items required for concealing a cable box

  • Velcro “zip ties”
  • Surge Protector
  • Velcro Strips
  • Power strip
  • IR Kit

How to hide a cable box

Step One: Placing the boxes

If you want your TV to remain in one place once you mount it, you should put in all of the hardware that will eventually be hidden from view before hanging it.

It is necessary to remove the television from its mounting bracket before proceeding. You won’t need to remove your TV from its swivel mount in order to install the boxes.

Either way, you should ensure the boxes aren’t visible from your primary viewing position. For this reason, before settling on a final spot, have someone hold up each piece of equipment in the area you believe will work. Then, sit on the sofa and look for visibility.

Step Two: Place velcro

If you want to hide two units, you can use at least four strips of Velcro. You may rest easy knowing that your cable box will stay put (most don’t weigh more than 5 pounds, so 2 strips should be more than enough). As a bonus, having two contact points makes the boxes more stable and keeps the bottom from sagging over time.

Step Three: Install the power strip

Since you’ll require electricity to run all these devices, a power strip is an absolute must. As well as a Velcro power strip. There should be a surge protector installed to safeguard the equipment.

Step Four: Install an infrared repeater

The infrared repeater should be attached to the cable box’s back.

Step Five: Wrap wires

Make loops with your wires to keep them organized.

With this strategy, concealing a cable box when mounting TV on wall is child’s play.

Benefits of mounting TV on wall

·        It saves space

Mounting TV on wall frees up a ton of space on your entertainment center or living room furniture. This is especially helpful for those who reside in micro or tiny-sized dwellings. This is because it makes the living area feel more spacious and less congested for social gatherings.

·        Safety

Modern televisions are more likely to topple over. If left where kids or pets can reach them, this makes them a hazard. Particularly problematic are toddlers who like playing with tablets and smartphones. This is because they can mistake a TV for a touchscreen and attempt to grab and swipe it.

How to Hide the Cable Box When Mounting TV on the Wall

Mounting TV on wall can provide you with a much-needed piece of mind by keeping it safely out of the reach of kids and preventing it from toppling over.

·        Viewing Angles

If you want to take full advantage of your TV, you need to make sure people can see it from all sides. A full-motion TV mount will allow you to place the TV precisely where you want it.

A full-motion mount can tilt, swivel, and extend your TV to eliminate glare, let you watch TV in another room, and even increase your field of view.

Conclusion

Electrical fittings and wall studs can be hazardous when drilling into a wall. If you drill into one of these, you could seriously damage your home’s wiring or even risk electrocution. A stud finder and other specialized tools can help to avoid this; therefore, it’s best to have a pro handle the task. Get out to the professionals at Peridon Entertainment right away for help with mounting TV on wall and all your other AV requirements.

Avatar
Author: